Joyetech
CUBIS Pro Atomizer – 4ml adopts innovative and leak resistant cup
design, whose coil replacement and juice fill can be achieved by
removing its top section from the cap. Airflow controls are also
contained within the removable top tank assembly, meaning the
possibility for leakage or coil flooding is greatly reduced. With the
CUBIS Pro Atomizer, you’ll enjoy a great vaping experience.
Joyetech CUBIS Pro Atomizer RTA Vape Parameters:
Capacity: 4ml
Size: 22mm x 54.5mm
Mouthpiece: 11.5mm x 16mm
Material: SS + Pyrex glass tube
Thread: 510 Thread
Joyetech CUBIS Pro RTA Atomizer Vape Features: Size: 22mm x 54.5mm
Mouthpiece: 11.5mm x 16mm
Material: SS + Pyrex glass tube
Thread: 510 Thread
Exclusive TFTA-Tank Technology with Greater Convenience
Detachable and Washable Structure
NotchCoil 0.25ohm DL. Head
Multiple Atomizer Heads Can Be Applied
Redesigned Airflow Control System
Support MTL and DL vaping
Joyetech CUBIS Pro Atomizer RTA Vape Comes With: Detachable and Washable Structure
NotchCoil 0.25ohm DL. Head
Multiple Atomizer Heads Can Be Applied
Redesigned Airflow Control System
Support MTL and DL vaping
1 x Joyetech CUBIS Pro Atomizer
1 x Notchcoil 0.25ohm DL (30 – 70W)
1 x BF SS316 0.5ohm DL (15 – 30W)
1 x LVC Clapton 1.5ohm MTL
1 x Extra Derlin Spiral Mouthpiece
1 x Manual and Warranty card
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
Joyetech CUBIS Pro Atomizer RTA Vape Operation Guide: 1 x Notchcoil 0.25ohm DL (30 – 70W)
1 x BF SS316 0.5ohm DL (15 – 30W)
1 x LVC Clapton 1.5ohm MTL
1 x Extra Derlin Spiral Mouthpiece
1 x Manual and Warranty card
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
How to assemble:
1. Screw the top cap onto the airflow ring and put the mouthpiece onto the top.
2. Drip a few drops into the atomizer head and install it onto the vent pipe.
3. Install the above part with the atomizer tube then the whole CUBIS Pro is assembled.
How to change atomizer head:
Unscrew the atomizer cap, the atomizer head is located on the cap. Just unscrew it and replace a new one.
Note:
1. Please don’t wash the atomizer head with water. Simply scrub it with cotton or clean dry cloth.
2. Please drip at least 5 drops of e-juice to the atomizer head and vape a few times in power-off condition (with airflow widely open) before its first use to avoid dry burn.
How to re-filling:
Separate the atomizer from the battery, and unscrew the mouthpiece base from the atomizer cap. Inject the liquid into the e-juice hole.
Note:
1. Please don’t fill in through the middle hole of the atomizer cap.
2. Please don’t overfill to avoid overflown.
1. Screw the top cap onto the airflow ring and put the mouthpiece onto the top.
2. Drip a few drops into the atomizer head and install it onto the vent pipe.
3. Install the above part with the atomizer tube then the whole CUBIS Pro is assembled.
How to change atomizer head:
Unscrew the atomizer cap, the atomizer head is located on the cap. Just unscrew it and replace a new one.
Note:
1. Please don’t wash the atomizer head with water. Simply scrub it with cotton or clean dry cloth.
2. Please drip at least 5 drops of e-juice to the atomizer head and vape a few times in power-off condition (with airflow widely open) before its first use to avoid dry burn.
How to re-filling:
Separate the atomizer from the battery, and unscrew the mouthpiece base from the atomizer cap. Inject the liquid into the e-juice hole.
Note:
1. Please don’t fill in through the middle hole of the atomizer cap.
2. Please don’t overfill to avoid overflown.
Pictures of Joyetech CUBIS Pro Atomizer RTA Vape:
没有评论:
发表评论